Microblading Removal Bilstonbecause you are beautiful
Microblading removal near Bilston
I find in my industry many clients come to me to “correct” work done elsewhere, they are either unhappy with the brow shape or colour or in most cases both.
I also find clients that will come to have their brows “topped up” after previous work has been done elsewhere maybe a year or two old. In these case’s I need to look at the skin and see how saturated it is with ink. The skin can only hold so much ink even if faded the ink is still in the skin so to add more when it’s still pretty saturated will only end up in a bad job. The skin will heal and there will be little to none of the new colour left as the skin simply could not hold any more.
That’s where colour lifting or lightening comes in and in some cases full removal is needed. I use a solution of salt & saline and after researching the best out there I decided to train with Lisa Henning (owner and developer of Botched Ink), she has trained and tried many other different types of non-laser removal, not just saline. She then went on to develop her own Botched Ink solution and I am experiencing amazing results.
scarring from microblading
Microblading itself if not done correctly can cause scaring within the brows, in particular the tails tend to scar more easily as this part of the brow has the thinnest skin so if pressure is not corrected whilst microblading then the incision will be too deep leaving the client with scaring. Some noticeable and some not so noticeable,
The great thing about Botched Ink I’m experiencing is the solution actually helps break down that scaring which will then help lift unwanted pigment but also help hair regrowth as many also experience loss of hair after microblading. The old type of tattoo brows too can cause deeper scaring so again removal would be necessary to start healing those scars before we could then put new pigment in.
If the skin has scaring it will not hold new pigment.
HOW IT WORKS –
Much like having a machine brow treatment I use a machine similar to a tattoo gun to cause superficial trauma to the skin and then soak the brow area with the solution. This is where the magic happens, the solution pulls up the pigment lifting it to the surface where we experience a flaking stage at which point some pigment will lift out, we repeat the process for the desired effect.
Treatment time is around one hour, the numbing cream is applied prior so can be painless throughout. You may experience a little stinging for a couple of minutes as the solution soaks.
The brows will need to stay dry for 10 days or until the flaking has stopped. A barrier cream will be applied 48hrs after treatment and then again if needed on the fourth day. Once the brows have completed flaking you are able to continue as normal.
If you have blue/grey/red colours to your brow’s I generally find on healing these colours will tend to become more brown so the healing process actually makes the brows a little more bearable.
I recommend clients commit to minimum 2-3 sessions. Depending on the age of the pigment and the amount of times they have been worked on will all determine how much work is needed. 8 weeks healing is need between each removal session and 12 weeks needed healing before we can start your new brows. It can not be rushed and is essential the skin has completely healed before we start further work. This is not a quick turn around o you must be committed to your appointments to see the best results.
For those looking for brow correction – removal and then new brows created I offer a discount on your removal. This discount will be applied onto your new brow treatment price.
Aftercare Instructions for
Microblading & Permanent Makeup removal
First 48 hours
Aftercare Instructions Microblading & Permanent Makeup removal
- Any redness surrounding the treated area subsides within an hour or two.
- Redness within the treated area becomes brown as the skin dries out.
- The treated area must be allowed to fully dry out over the next 48 hours.
- For most people the area is touch dry within the first few hours.
- Only touch with very clean hands, ideally no touching for 48 hours.
- If the skin is not allowed to dry out quickly you will not get the best results.
- Do not use any other aftercare products during this initial drying out phase.
- Do not the area wet or sweaty for 48 hours.
- For lip liner treatments, during this phase keep movements small and to a minimum.
After 48 hours
- The treated area is now very dry, and a light scab will have formed.
- You may see pigment visible in the scab.
ONE SINGLE APPLICATION of Cavilon barrier cream on and slightly around the scab
This single application will last for 3 to 4 days, leaving a soft film over the scab, which can be reapplies day 4 if needed
- You can get the area a little wet when washing and showering, avoid rubbing the area After any wetness, gently hold a clean tissue on the scab to dry it out.
- No excessive wetting the area, no swimming etc while the scab is on.
- The scab will remain firmly attached for 5 to 14 days.
- Excessive movements are likely to crack the scab, which is not ideal for easy healing.
- Do not attempt to remove the scab before it naturally heals away from the treated area For eyebrows, the scab might be held in eyebrow hair until gently removed but strictly no picking you may scar.
- At no time can you pick off attached scabs, you will cause unwanted results.
Skin prone to hyperpigmentation
- For those prone to hyperpigmentation, follow ‘First 48 hours’ advice. After 48 hours the scab and surrounding skin must NOT be allowed to dry out or hyperpigmentation can occur.
- Re-apply Cavilon cream every 2 or 3 days until skin until skin returns to a normal colour.
After the scab heals off:
- The pigment may look visibly lighter or different for the first 1-8 weeks
- These are not considered results, it’s your skin healing and the remaining pigment settling.
- You can begin using makeup on the area if desired.
- Treat the area gently, no exfoliating or excessive sun exposure.
- The second treatment can be carried out after 8 weeks.
- Treatment cycle is 8 weeks, 8 weeks, 12 weeks and repeated as required.
- We leave a longer time if the skin has not returned to a normal colour.
The Removal Process
Removing, improving or lightening pigment is a process which may take several sessions Mature or saturated tattoos may initially respond slowly
After 3 treatments we’ll have a better idea how easily the pigment is removing
Pigment may look darker before it gets lighter, especially if was implanted deeply Pigment that’s closer to the surface removes easier
Brown pigment is made up of black, white, yellow, red and green Black pigment usually removes first, making other colours more visible Grey brows may look browner, or warmer colours may begin to show
Tattoo removal is a process with many variables, therefore how much pigment is removed during each visit, or how many visits are needed, cannot be known or guaranteed
Failure to follow these aftercare instructions may reduce the effect of the treatment and may result in undesired problems such as hyperpigmentation, scarring or infection. In the unlikely event of an infection, your technician cannot give medical advice, so immediately seek attention from a GP
Course of Treatments
Any kind of tattoo removal is a process, it’s worth mentally and financially committing to a course of 3 treatments so we can assess how easily the pigment is removing from your skin
• Most clients see improvements after 2 or 3 sessions
• Initially, the pigment may look darker before it gets lighter
• Pigment that sits deep in the skin comes up to the surface
• This makes removal easier in further sessions
For some the goal is complete removal, others are looking for lightening so the area can be re-worked. During the removal process, we are assessing and responding to the pigment, how deep it sits in the skin is the area saturated with pigment and skin stain (the russet, lilac and warm colours) from years of top-ups. The fresher the tattoo, the easier it is to remove